Adapters
Please browse our selection of products from the links to the left or download our complete PDF catalog of products here.
Please call or
e-mail us us so that we may help you select the perfect product for your intended application.
Select an accessory product from below or from the menu to the left.
Screw-in adapter for reducing 5/8"-11 threads to common smaller thread sizes. Used on wire cups and wheels.
Top
| Brush Thread | Tool Spindle | Item Number | Price |
|---|
| 5/8"- 11 | 3/8 - 24 | ADA.20011965 | $5.00 |
| 5/8"- 11 | M10 x 1.25 | 84645 | Call |
| 5/8"- 11 | M10 x 1.5 | 84646 | Call |
Screw-in adapter increases 5/8"-11 threaded bolt to 7/8". For use on cutting and grinding discs on angle grinders. Designed for use on discs with depressed center. Not recommended for re-use.
Top
| Disc Type | Item Number | Price |
|---|
| Grinding 4.5" x 1/4" x 7/8" | ADA.CP59FP3P | $9.50 |
| Grinding 7" - 9" x 1/4" x 7/8" | ADA.CP59FP7P | $9.50 |
| Cutting 4.5" x 1/8" x 7/8" | ADA.CP59H3C | $9.50 |
| Cutting 7" - 9" x 1/8" x 7/8" | ADA.CP59H7C | $9.50 |
Reusable hub for use with 7" and 9" type 27 wheels on angle grinders. Screw-in adapter increases 5/8"-11 threaded bolt to 7/8". May be re-used due to stronger construction and secure locking nut.
Top
| Disc Type | Item Number | Price |
|---|
| Type 27 7" - 9" x 1/4" x 7/8" | PFE.69009 | $25.00 |
Fits depressed center wheels.
For use with grinding wheels, flex wheels and multi-discs.
Fits most brands 4-1/2", 5", & 7" grinders.
Top
| Grinder Type | Item Number | Price |
|---|
| 4" - 9" | MA193465-4 | $9.50 |
Inner flange for use on Angle Grinders.
Top
| Grinder Type | Item Number | Price |
|---|
| 4" - 9" | MA224378-9 | $8.00 |
For use on unmounted wheels, these are high quality bushings expected from a brand of Klingspor's caliber.
Top
| Product | Dia. | Item Number | Price Pair |
|---|
| Klingspor Bushing | 1" to 5/8" | ADA.KLI-FLUT-SP | $6.00 |
| Klingspor Bushing | 1/2" to 1/4" | ADA.KLI-FLUTTER | $6.00 |
Abra-Metal provides a complete assortment of plastic bushings to mount bench wheels on your grinder or for other general adapting needs. Do not exceed RPM's listed on wheels. Note that smaller spindles often run at a higher RPM.
Top
| Diameter " | Item Number | Price |
|---|
| Telescoping | | Each |
| 1" Wide, 1" to 3/4", 5/8", 1/2" | ADA.PFE69011 | $2.50 |
| 0.5" Wide 1" to 3/4", 5/8", 1/2" | ADA.PFE69018 | $2.50 |
| Standard | | Pair |
| 1" to 3/4" | ADA.0134 | $0.50 |
| 3/4" to 5/8" | ADA.03458 | $0.50 |
| 5/8" to 1/2" | ADA.05812 | $0.50 |
| 1/2" to 3/8" | ADA.1238 | $0.50 |
| 22.2mm to 5/8" | ADA.7858 | $0.75 |
| 1-1/2" to 1-1/4" | ADA.112114 | $0.75 |
| 1-1/4" to 1" | ADA.1141 | $0.75 |
| 1-1/4" to 3/4" | ADA.11434 | $0.75 |
Abra-Metal provides a complete assortment of metal bushings for use on saw blades, abrasive discs, diamond discs and more.
Top
| Diameter " | Item Number | Price |
|---|
| 7/8" to 5/8" | ADA.TYR00099 | $1.50 |
| 1" to 20mm | ADA.TYR00106 | $1.00 |
This mandrel is required for use with Goblet Buffs. One end has a threaded taper which screws into goblet buffs. The other end has a 1/4" mandrel which can be inserted into your electric or air drill or straight grinder. Observe maximum RPM - 3,600.
Top
| Goblet Type | Shank Length | Shank Dia.. | Overall Length | Item Number | Price |
|---|
| Conic | 3/4" | 1/4" | 2-1/2" | ADA.DIV-2510 | $6.00 |
Top
| Pilot Shank | Pilot Length | Shank | Total Length | ID Code | List Price |
|---|
| 1/8 | 1-1/2 | 1/4 | 2 | ADA.KLI708875 | $6.00 |
| 1/8 | 1 | 1/4 | 2 | ADA.KLI710190 | $6.00 |
| 3/16 | 1 | 1/4 | 2 | ADA.22166 | $6.00 |
| 1/4 | 1-1/2 | 1/4 | 2 | ADA.22226 | $6.00 |
| 1 | 1 | 1/4 | 1-1/2 | ADA.KLI-RD11 | $7.50 |
Nut can be removed to replace worn brush while arbor is in chuck.
Top
| Fits Brush ID | Wheel Width | Shaft Dia. | Head/Washer Diam. | Overall Length | Item Number | Price |
|---|
| 1/4" | Up to 3/4" | 1/4" | 1/2" | 2-1/2" | ADA.21009 (PFE.84657) | $14.90 |
Brush mounts between a single washer and the flat head. Locked in place with a left-hand reverse threaded nut. This allows the brush to be close to the workpiece. Threaded shaft.
Top
| Fits Brush ID | Wheel Width | Shaft Dia. | Head/Washer Diam. | Overall Length | Item Number | Price |
|---|
| 3/8" | Up to 3/8" | 1/4" | 3/4" | 1-5/8" | ADA.PFE.53040 (PFE.84654) | $6.00 |
| 1/2" | Up to 3/8" | 1/4" | 7/8" | 1-7/8" | ADA.PFE.53041 (PFE.84655) | $6.00 |
Drive arbors for mounting die grinder cutting wheels with 3/8" or 1/4" arbor hole into collet-equipped air and electric tools. Leave the shank inserted in collet while changing arbor hole sizes with this COMBO Drive Arbor. Observe maximum RPM: 30,000.
Top
| Product | Shank Dia. | Item Number | Price |
|---|
| 3/8" & 1/4" Drive Arbor | 3/8" and 1/4" | ADA.PFE69028 | $14.50 |
Use this drive arbor to mount up to three POLIVLIES discs on one arbor for finishing difficult contours. Arbors are supplied with one pair of metal discs (2" and 3") for lateral flexibility and adjustment. 
The tool can be changed from the front by slackening the mounting screw without arbor removal.
Top
| Shank Dia. | Mounting Dia | Clamping Width | Item Number | Price |
|---|
| 1/4" | 1/4" | 5/8" | ADA.PFE.43466 | $7.50 |
| 1/4" | 1/2" | 1/2" | ADA.PFE.43468 | $9.00 |
Slotted rubber drum holders available in cylindrical shape. For use with abrasive spiral bands. Also available in tapered type - call to order.
Top
| Dia. | Length | Shank Dia. | Item Number | Price |
|---|
| 1" | 1" | 1/4 | PFE.41982 / KLI-RD11 | $11.00 |
These arbor and flange combos are intended specially for use with unmounted wheels. Clamping flanges are held in the tool recess. This provides optimum facedown grinding, even near edges and corners. 
Comes with 1/2" arbor and 2 flanges plus suitable screws for various flap wheel widths.
Top
| Shank Dia. | Clamping Width " | Fits Flap Wheel ID | For Wheel Diameter | Item Number | Price |
|---|
| 1/2" | 1"-2" | 1" | 4"-6" | ADA.PFE.45714 | $32.00 |
These reducing flanges can be used with unmounted wheels on a staionary machine (Bench Grinder).
Top
| Fits Flap Wheel ID | Bore " | For Wheel Diameter | Item Number | Price |
|---|
| 1" | 5/8" | 4"-6" | ADA.PFE.45721 | $15.00 |
Top
| Diameter | Length | Shank | Max. RPM | Price |
|---|
| 3/16 | 3/8 | 1/8 | 95,000 | $6.00 |
| 9/32 | 1/2 | 1/8 | 65,000 | $6.20 |
| 3/8 | 5/8 | 1/8 | 45,000 | $6.20 |
| 1/2 | 11/16 | 1/4 | 35,000 | $6.80 |
| 5/8 | 1 | 1/4 | 30,000 | $7.00 |
Top
| Diameter | Length | Shank | Max. RPM | Price |
|---|
| 1/4 | 5/8 | 1/4 | 95,000 | $6.20 |
| 7/16 | 1 | 1/4 | 40,000 | $6.20 |
| 5/8 | 1-1/4 | 1/4 | 30,000 | $6.20 |
| 27/32 | 1-9/16 | 1/4 | 20,000 | $6.80 |
SMD 612 Mounting Plates are REQUIRED for KLINGSPOR's Mac Mop. Mounting plates offer top quality alignment for your Mac Mop and can be used repeatedly.
Available in custom arbor hole sizes.
Top
| OD | Arbor Hole | Item Number | Price |
|---|
| 3" | Converts 1" to 5/8" | ADA.SM612MOP | $10.75/set |
Top
| Diameter " | Backing | ID Code | List Price |
|---|
| 1 | Medium | ADA.PFE | $12.00 |
| 1.5 | Medium | | $13.00 |
| 2 | Medium | | $14.00 |
| 3 | Soft | ADA.PFE42463 | $18.50 |
| 3 | Medium | | $18.50 |
| 3 | Hard | | $19.00 |
